Home | Short courses

Short courses

National ID State ID Title Qualification level Study mode Campus
IAB36 4WD Training - Resource Sector Skill Set Skill set Face-to-face classroom delivery
Karratha Campus

Driving a four wheel drive on a remote worksite can be hazardous - therefore the correct training is essential.

This course will provide participants with the practical and theoretical knowledge to operate and maintain a four wheel drive vehicle in off-road conditions.

Please bring along: 

  • Current driver’s licence
  • 4WD with a full tank of fuel
  • Closed in shoes
  • Hat, sunscreen and sunglasses
  • Plenty of water
     
IAA15 Barista Skill Set Skill set Face-to-face classroom delivery
Broome Campus
Barista Skill Set, barista, coffee training

Do you want to learn how to make a perfect espresso coffee in a café, restaurant, or just to enjoy at home?

This course will teach participants how to fluently speak the language of espresso and all the basics on how to make the very best espresso coffee using a commercial espresso machine, storage of coffee, cleaning, care and preventative maintenance of machinery.

You will make a range of espresso coffees using top quality freshly roasted beans from around the world, including:

  • Cappuccino
  • Espresso
  • Macchiato
  • Ristretto
  • Mocha and more...
IAA02 Chainsaw Skill Set - Kimberley Skill set Face-to-face classroom delivery
Broome Campus
Kununurra Campus
Chainsaw, training, cut trees, maintenance, job training

Do you know how to operate and maintain your chainsaw in a safe manner?

The appropriate and safe use of a chainsaw is a specialist skill that requires expert training. Get the job done quickly and safely with this two-day short course!

Participants will learn how to:

  • Safely operate and maintain a handheld chainsaw
  • Fell small trees where hazards are of low risk
  • Recognise and report hazards
  • Participate in arrangements for maintaining work health and safety
IAA09 Chemical Handling Skill Set Skill set Face-to-face classroom delivery
Broome Campus
Karratha Campus
Chemical Handling, Chem handling, chem hand

The Chemical Handling Skill Set is crucial to a broad range of outside activities offered in horticulture, agriculture, and conservation and land management.

This course covers all of the important procedures required to apply chemicals safely on plants using small portable handheld sprayers.

Students will learn how to:

  • Identify the level of pest infestation and assess the need for chemical control
  • Source information on Integrated Pest Management
  • Identify potential hazards, assess risks, and implement control measures
  • Select appropriate PPE for the chemical
  • Interpret chemical labels and SDSs
  • Calibrate equipment
  • Mix chemicals accurately and according to their registered use
  • Apply chemicals minimising spray drift
  • Transport and handle chemicals complying with legislative requirements
  • Store chemicals correctly and maintain inventory
  • Treat chemical spills
  • Dispose of any chemicals correctly and decontaminate equipment
  • Complete application records

Completion of this course will enable participants to apply for the WA Department of Health’s Lawn and Gardening, Landscaping, Bushland & Minesite Rehabilitation licence. Please visit www.health.wa.gov.au for further details.

What to bring:

  • Boots
  • Long sleeved shirt
  • Long pants
  • Washable hat
  • Lunch and water
  • Optional change of clothes for day two

Students studying in Broome: 

From March 2019, students studying in Broome will complete the theory component of the course online in their own time. This reduces face to face delivery from three days to two, enabling full time employees to take less time off of work. Students must enrol at least two weeks prior to course commencement in order to access and complete the online component.
 

IAC98 Coxswain Engineering Skill Set Skill set Face-to-face classroom delivery
Broome Campus
coxswain, coxswain engineering, coxen, coxan, coxsan, coxswen, coxswain engineering skill set, maritime training

Learn the basics of marine engineering.

This Coxswain Engineering Skill Set is a mandatory requirement in the Certificate II in Maritime Operations (Coxswain Grade 1 near Coastal) qualification. This skill set is an intensive three-day course introducing basic marine engineering.

During this course, participants will learn how to:

  • Operate and service small vessel propulsion systems including diesel and petrol engines, cooling systems and lubrication systems
  • Undertake pre-start checks, routine checks, fault finding, shutdown procedures
  • Operate and service auxiliary systems including steering systems, emergency steering, rudders, bilges systems, manifold systems and valves
  • Operate deck machinery, anchor windlass, winches
  • Maintain and service marine extra low and low voltage electrical systems
  • Carry out refuelling and fuel transfer operations.

This course will provide participants with the ability to maintain machinery, troubleshoot and identify potential problems, as well as service machinery according to manufacturers' schedules.

IAC99 Coxswain Navigation Skill Set Skill set Face-to-face classroom delivery
Broome Campus
Coxswain Navigation Skill Set, coxswain navigation, coxswain nav, coxen nav, coxan nav, cox navigation, maritime training, maritime short course

The Coxswain Navigation Skill Set is an intensive and hands-on three-day course that forms part of the mandatory requirement of the Certificate II in Maritime Operations (Coxswain Grade 1 near Coastal) qualification.

Participants will learn how to:

  • Develop and undertake a passage plan for your vessel in recognition of weather and tides
  • Interpret navigational charts and navigational hazards
  • Safely and accurately plot your position using a range of different navigation equipment
  • Apply navigation to coastal voyages

This course provides great skills for recreational and commercial vessel operators alike and is a must for anyone wanting to undertake a boating trip.

Books required: NAUTICALKN Nautical Knowledge (Coxswain): Student learning guide ABF521/SLG

IAC97 Coxswain Vessel Operations and Environmental Practice Skill set Face-to-face classroom delivery
Broome Campus
Coxswain Vessel Operations and Environmental Practice, coxswain vessel ops, coxswain enviro practice, coxswain training, coxsan training, coxen training, maritime short course

This Skill set is a fundamental component of both the Certificate I in Maritime Operations (Coxswain Grade 2 near Coastal) and Certificate II in Maritime Operations (Coxswain Grade 1) qualifications.

This course covers all of the necessary points to safely operate and manoeuvre a vessel to 12m in length following domestic regulations.

This course is rigorous and students will learn to: 

  • Apply regulations, laws and codes of conduct required to operate a commercial vessel
  • Handle and manoeuvre a vessel in varying conditions and emergencies
  • Tow and be towed safely
  • Secure a vessel and apply ropes and knots to different situations
  • Understand and maintain different propulsion systems and their application
  • Check the condition and seaworthiness of a vessel and identify engine faults
  • Refuel 

The final day of the course will consist of the Coxswain Environmental Practice Skill Set as applicable to the Coxswain Grade 2, Coxswain Grade 1 and MED II qualifications.

IAC79 Creativity in the Visual Arts Skill Set Skill set Face-to-face classroom delivery
Derby Campus
Fitzroy Crossing Campus

Get creative in the visual arts space!

 

Derby - Join us Wednesdays from 5.00pm - 8.00pm, begins 12 February

Experiment, explore and learn a variety of techniques using clay, to form your own creative pieces through North Regional TAFE’s weekly ceramic class in Derby.

During these sessions you will imaginatively explore ceramic materials and processes to create and form your pieces by hand. Firing and glazing will also take place, where you will learn more about colours and design ideas that are relevant to your formed pieces.

 

Fitzroy Crossing - Join us Tuesdays from 5.00pm - 8.00pm, begins 3 March

Experiment, explore and learn a variety of techniques within the visual arts, including printmaking, drawing, painting and ceramic skills. With each workshop you will imaginatively explore a different process every time, allowing you to experiment with several art processes to design and create small works of art.

 

This unit is appropriate for beginners, teachers, artists and hobbyists, where you can work at your own pace under the guidance of a lecturer.

IAA25 Dogging Skill Set Skill set Face-to-face classroom delivery
Halls Creek Campus
Kununurra Campus

Individuals who direct the operation of cranes on construction sites are required to hold a Dogging High Risk Work Licence.

Throughout this course, participants will learn how to:

  • Correctly perform slinging techniques
  • Select and inspect lifting gear
  • Direct crane operators in the movement of loads out of view of the operator

The unit of competency covered in this course is based upon the National Standard for Licensing Persons Performing High Risk Work.

IAC96 Elements of Shipboard Safety (ESS) Skill Set Skill set Face-to-face classroom delivery
Broome Campus
elements of shipboard safety, ESS, shipboard safety, ship safety, maritime training, maritime short course

The Elements of Shipboard Safety Skill Set forms a crucial part of all maritime qualifications offered from Coxswain Grade II, Coxswain, Master 24 and MED II. This three-day course covers all of the important emergency procedures required to survive at sea if disaster strikes. The course is intensive, rigorous and physically demanding.

Participants will learn how to:

  • Swim short distances while fully clothed and wearing shoes without the aid of a life jacket
  • Launch a life raft, right an inverted life-raft, climb into the life raft and assist other survivors
  • Successfully use flares, EPRIBS and other emergency equipment
  • Follow evacuation procedures to abandon ship and use survival techniques such as HELP (Heat Escape Lessening Position)
  • Use correct fire extinguisher to extinguish a fire type such as oil fire, electrical fire or plastic fire
  • Understand and practice OS&H workplace procedures
IAA27 Elevated Work Platform Skill Set Skill set Face-to-face classroom delivery
Halls Creek Campus

Gain the skills and knowledge required to safely operate a boom-type Elevating Work Platform (EWP), where the length of the boom is 11 metres or more.

Participants will be guided through the process, from identifying the work order, to safely preparing for the task to be carried out, performing the duties, and finally packing up, ensuring all post-operational checks are completed.

This nationally-recognised course is accredited by WorkSafe WA. On completion, participants will receive a statement of attainment and a WorkSafe WA permit.

IAA08 First Aid Skill Set Skill set Face-to-face classroom delivery
Face-to-face off campus delivery
Karratha Campus
first aid training, first aid

Learn how to provide first aid in emergency situations.

Throughout this course, participants will learn how to:

  • Respond to an emergency situation
  • Apply appropriate first aid procedures
  • Communicate details of the incident
  • Evaluate the incident and their own performance

This course consists of practical components that must be completed on the floor. Please wear comfortable and appropriate clothing.

First Aid is a vital set of lifesaving skills, don’t delay, get trained today!

IAB84 Food Safety Supervisor Skill Set Skill set Face-to-face classroom delivery
Broome Campus
Kununurra Campus

Would you like nationally recognised training in hospitality? NR TAFE has a skill set for anyone wanting to kick-start their career today!

Operators of registered food businesses must ensure those who handle food within their business handle foods safely. To ensure this happens, the manager/owner must nominate a Food Safety Supervisor, who has the responsibility of recognising, preventing and alleviating the risks associated with food handling in your workplace.

If you work in a commercial kitchen or are just looking to enter the industry this is an excellent qualification to hold.

This course covers how to:
• Understand the obligations of food handlers under current legislation
• Handle and store food safely
• Reduce the risk of food-borne illness (food poisoning)
• Implement procedures for food safety
• Follow all food safety policies and procedures correctly and consistently according to organisation food safety program requirements to ensure compliance of all food handling practices
• Control food hazards at critical control points
• Complete food safety monitoring processes and complete documents as outlined in the food safety program
• Identify and report practices that are inconsistent with the food safety program
• Take corrective actions for incidents where food hazards are unacceptable
• Identify potential hygiene risks
• Implement correct methods of cleaning and sanitising
• Maintain correct standards of personal hygiene for food handlers in your workplace

IAA07 Forklift Skill Set Skill set Face-to-face classroom delivery
Broome Campus
Halls Creek Campus
Karratha Campus
Kununurra Campus
Minurmarghali Mia (Roebourne) Campus
forklift, fork, fork training, forklift course

Learn how to operate a forklift safely and efficiently.

Participants will be guided through the operation of a forklift, ensuring:

  • Risk control measures are implemented
  • Traffic management is carried out in accordance with workplace procedures
  • Pre-start and operational checks are completed
  • Loads are monitored correctly
  • Shutdown procedures are carried out

Upon completion, participants will receive a forklift Notice of Assessment and a Work Safe High Risk Work Licence.

Please note:

  • Participants must be aged 18 years or over, and provide two primary forms of identification, along with two passport photos.
  • Participants are required to wear a high visibility shirt and steel cap boots during the course.
     
IAA93 Front End Loader Skill Set Skill set Face-to-face classroom delivery
Halls Creek Campus
Kununurra Campus
Front end loader, loader training, loader short course, FEL course, front end loader training

Learn how to operate a front end loader safely and efficiently.

Throughout this course, participants will be guided through:

  • Planning and preparation
  • Pre-start checks
  • Front end loader operations, including attaching, securing, lifting, carrying and placing materials
  • Machine relocation
  • Machine operator maintenance
  • Shutdown procedure

Upon successful completion, participants will be able to operate a wheeled front end loader within the civil construction and resources industries. 

K2004P K2004P IELTS Preparation Course Short Course Face-to-face classroom delivery
Karratha Campus

Do you need to prepare for the International English Language Testing System (IELTS) exam?

These sessions offer an in-depth focus on each element of the exam, assisting participants to understand and apply relevant skills and knowledge within the exam context. Students have the opportunity to sit the IELTS exam with a University of Western Australia examiner following completion of this course.

 

Join us for four sessions from 4.00pm - 7.00pm

 

The UWA Test Centre is pleased to announce that IELTS tests will be conducted in Karratha on Thursday 13 February 2020. Places are limited so please book in early.

To book your place for the IELTS test, please visit the UWA website via:
www.ielts.uwa.edu.au.

For more information contact:
ielts@uwa.edu.au
 

K2000P K2000P Introductory Training for Health and Safety Representatives Short Course Face-to-face classroom delivery
Karratha Campus
TAFE09, TAFE17, R000000, Business and Finance, R000024, Work Health and Safety, workplace safety, OSH rep, workplace rep, intro training, WHS training

Need to know about workplace health and safety?

This five-day course has been designed to provide elected work health and safety representatives with the skills to effectively represent their fellow employees in matters relating to occupational safety, health and welfare.

Participants will be guided through:

  • Requirements of current occupational health, safety and welfare legislation within the workplace
  • Workplace hazards and control methods
  • Conducting effective workplace health and safety inspections
  • Conducting effective investigations into workplace accidents or incidents
  • The role of work health and safety representatives from management and union perspectives
  • Mental health issues, including anxiety, depression and resilience
  • Local support services and referrals

Need to refresh your existing workplace health and safety skills? Check out our Work Health and Safety Reps Refresher Course.

 

Onslow

24-28 February

 

IAD28 MYOB Introduction Skill Set Skill set Face-to-face classroom delivery
Broome Campus
MYOB Intro Workshop Skill Set, myob introduction, myob, myob training

MYOB is a useful tool for small businesses.

This workshop provides a short introduction into the MYOB software.

During this workshop, participants will learn how to:

  • Enter sales and purchases into MYOB
  • Print invoices
  • Use a range of GST codes
  • Enter payments received
  • Customise invoices

The textbook, A Step by Step Approach to Administer Subsidiary Accounts and Ledgers is required. Choose to complete assessments after the workshop and/or receive a letter documenting your participation.

IAD01 Marine Engine Driver (MED 2) Skill Set Skill set Face-to-face classroom delivery
Broome Campus
Marine engine driver, MED 2, marine engine, marine driver, maritime short course, maritime training

The Marine Enginer Driver (MED 2) Skill Set has been designed for experienced crew working towards their Certificate III in Maritime Operations (Marine Engine Driver Grade II).

Participants will learn how to:

  • Service and maintain engines, auxiliary equipment and vessels to high standards and within regulations
  • Manage a range of engineering components and systems
  • Operate and maintain a range of electrical systems and equipment
  • Undertake and record routine checks on engine room items
IAD04 Master 24 Navigation Watchkeeping Skill Set Skill set Face-to-face classroom delivery
Broome Campus
Master 24, master 24 navigation watch keeping, watch keeping, maritime short course, maritime simulator, BMSC training


The Master 24 Navigation Watch Keeping Skill Set is an intensive five-day course and is mandatory for the Certificate III in Maritime Operations (Master up to 24 Metres near Coastal) qualification.

Participants will learn how to:

  • Maintain a bridge watch whilst anchored and at sea
  • Respond to emergency situations
  • Manage crew on watch
  • Plan, navigate and execute a passage in a range of weather and tides
  • Set up and use a wide range of wheelhouse equipment including radar, ECS, ECDIS, AIS, DGPS and GPS, sounders, and more
  • Maintain navigational records

Participants will work on a detailed scenario for a simulated vessel ‘Master Class’ and run the vessel through a scenario on our worldclass full mission, full bridge maritime simulator. This simulation is state of the art and we are confident that you will not find any better training for this skill set anywhere in Australia.

IAD36 Master 24 Seamanship Skill Set Skill set Face-to-face classroom delivery
Broome Campus
Master 24 Seamanship Skill Set, master, boat master, maritime short course, marine short course, master 24

The Master 24 Seamanship Skill Set is an intensive five day course and is a mandatory skill set for the Certificate III in Maritime Operations (Master up to 24 metres Near Coastal) qualification.

Participants will learn how to:

  • Ensure that the vessel maintains survey
  • Apply regulations to vessel maintenance and maintain necessary records
  • Successfully work with crew to achieve goals
  • Ensure environmental standards are being met
  • Manoeuvre a vessel up to 24 metres in a range of different conditions and in emergencies
  • Apply seamanship skills including using and maintaining ropes and wires, operating lifting gear, securing a vessel, checking the seaworthiness and stability of a vessel, securing stores and loads, and overseeing refuelling operations.
IAD35 Master 24 Ship Knowledge Skill Set Skill set Face-to-face classroom delivery
Broome Campus
Master 24 ship knowledge, master 24 short course, master 24 skill set, ship knowledge course, master 24 course, master 24, maritime short course, maritime course

The Master 24 Ship Knowledge Skill Set is a five-day course that is a prerequisite for the Certificate III in Maritime Operations (Master up to 24 Metres near Coastal) qualification. This skill set focuses on the necessary skills required to sufficiently maintain a vessel up to 24 metres in length.

Participants will learn how to:

  • Plan and undertake basic deck maintenance
  • Clean and prepare the vessel for maintenance
  • Carry out maintenance of deck fittings, equipment and systems, underwater components and identify faulty components
  • Supervise crew undertaking maintenance
  • Safely slip a vessel
  • Undertake pre-deployment checks and duties

Books required:

  • SHIPSKNOWL Ship Knowledge (Master 5) : Student learning guide ABF533/SLG
  •  Australian Boating Manual
IAA34 Microsoft Excel Advanced Skill Set Skill set Face-to-face classroom delivery
Karratha Campus

Develop skills in advanced analysis and automation tools using Microsoft Excel.

This course teaches participants how to successfully produce spread sheets for their business management and information analysis needs.

Topics covered:

  • Lookup and reference functions
  • Modifying Excel options
  • Customised formatting of charts
  • Labels and names in a workbook
  • Data protection
  • Summaries using subtotals
  • Data linking and consolidation
  • Pivot tables, group cells and outlines
  • Using the solver tool
  • Using macro recorder
IAA40 Microsoft Excel Intermediate Skill Set Skill set Face-to-face classroom delivery
Karratha Campus
Tom Price Campus
excel training, microsoft excel training, MS excel training, excel intermediate, excel inter, exel training

Develop your skills in Microsoft Excel with this intermediate level course.

This course covers:

  • Fill operations within a data series
  • Moving the content of cells and ranges
  • Formula techniques
  • Logical functions
  • Number formatting techniques
  • Conditional formatting and borders
  • Techniques to enhance charts
  • Text formatting techniques

 

IAA36 Microsoft Excel Introduction Skill Set Skill set Face-to-face classroom delivery
Karratha Campus
Tom Price Campus

Develop your skills in Microsoft Excel

This course is designed to give participants a thorough understanding of Microsoft Excel 2013 and its uses.

 Participants will learn how to:

  • Open, navigate and create new workbooks and worksheets
  • Understand and work with ranges in a worksheet
  • Understand, create and work with formulas and functions to perform calculations
  • Understand and use formula cell referencing to create more complex formulas
  • Use font formatting techniques to enhance the look of a worksheet
  • Print workbook data
  • Use a number of formatting features and create effective charts

 

IAA37 Microsoft Outlook Introduction Skill Set Skill set Face-to-face classroom delivery
Karratha Campus
Microsoft Outlook Introduction Skill Set, outlook intro, outlook introduction, outlook courses, outlook training, out

Need to boost your email skills?

This course provides new email users with a basic understanding of Microsoft Outlook 2013. The skills acquired in this course assist users in managing email accounts, scheduling appointments, and keeping track of contact information. 

Participants will learn how to:

  • Navigate through Outlook 2013
  • Create, send and receive email messages
  • Competently work with file and item attachments
  • Use message flags and reminders
  • Address junk email
  • Utilise the calendar feature
  • Create and work with contacts and tasks

By proposal, this course can be customised to suit individual and business needs, and can also be delivered off-campus.

IAA39 Microsoft Word Intermediate Skill Set Skill set Face-to-face classroom delivery
Karratha Campus
Minurmarghali Mia (Roebourne) Campus

Develop your skills in Microsoft Word 2013 with this intermediate level course. 

Participants will learn how to produce more intricate and varied documents. 
This course covers:

  • Word options for easy access to files and information
  • Enhancing text and paragraphs using formatting features
  • Using tabs and numbered lists
  • Creating enhanced tables
  • Use timesaving features
  • Styles and templates
  • Headers and footers
  • Working with themes
  • Mail merges

In order to enrol in this skill set course, participants must have completed Microsoft Word Introduction, or have a basic understanding of it's functions.

Skill Set Pathways
 Microsoft Word Advanced

IAA35 Microsoft Word Introduction Skill Set Skill set Face-to-face classroom delivery
Karratha Campus
Minurmarghali Mia (Roebourne) Campus

Learn how to master Microsoft Word with this introductory skill set.

This beginner level course has been designed to provide participants with a thorough understanding in the basics of Microsoft Word 2013.

This cover covers:

  • Creating, formatting and printing simple Word documents
  • Understanding screens, menus and dialogue boxes
  • Working with text and paragraphs
  • Page layout and design features
  • Working with tables
  • Printing documents
  • Accessing additional help and services

In order to enrol in this short course, participants must have a general understanding of personal computers and the Windows operating system.

IAA13 Responsible Service of Alcohol (RSA) Skill Set Skill set Face-to-face classroom delivery
Broome Campus
Kununurra Campus
RSA, responsible service of alcohol, RSA course, alcohol service training, bar training

Do you work in a venue where alcohol is served?

Responsible practices must be undertaken wherever alcohol is served or sold, including all types of hospitality venues, retail liquor outlets and wineries, breweries and distilleries.

This course covers the specifics of dealing with the sale and service of alcohol including local accord agreements.

The course will be delivered face to face by an experienced industry professional and covers real life scenarios. The legal responsibilities and duty of care of organisations and individuals is investigated and group discussion is encouraged.

This is a nationally recognised course and contributes to a Certificate II in Hospitality.

IAA19 Skid Steer Loader Operations Skill Set Skill set Face-to-face classroom delivery
Kununurra Campus

Gain the skills and knowledge required to conduct civil construction skidsteer loader operations within the civil construction industry.


Participants will learn how to:

  • Operate a Bobcat/skidsteer
  • Plan and prepare for skidsteer loader operations
  • Load, carry and place materials
  • Select, remove and fit attachments
  • Move the skidsteer safely between worksites
  • Undertake machine maintenance
  • Clear and maintain work area
K2002P K2002P Snake Handling Short Course Face-to-face classroom delivery
Karratha Campus
Minurmarghali Mia (Roebourne) Campus
, TAFE17, TAFE09, C000000, Agriculture, Animals, Science and the Environment, C000001, Animal Studies, snake handling, snake course, snake handler, reptile handler, venomous snakes

Need to know how to capture and release reptiles, including venomous snakes?

This course provides participants with the skills and knowledge to safely remove and relocate snakes in the home and workplace.

Topics covered throughout this course:

  • Snake and reptile behaviour
  • Utilising protective clothing and equipment
  • Catching and releasing venomous species in a supervised setting
  • Keeping yourself and others safe in the presence of dangerous snakes
  • Administering first aid for bites and stings

To attend this course, you must be wearing Personal Protective Equipment (PPE), including long trousers and covered footwear.

IAD55 Textile Printing - Advanced Skill Set Skill set Face-to-face classroom delivery
Broome Campus
Textile, printmaking, art course, broome art, broome textile, broome textile printmaking, print making

This course is suitable for creative types who have mastered the basics of textile printing, and wish to take their skills to the next level.

Participants will be able to explore some of their favourite motifs on paper and fabric. Students attending this class will learn how to produce their own line of works using some ready-made materials.

IAD54 Textile Printing - Intermediate Skill Set Skill set Face-to-face classroom delivery
Broome Campus
Textile, printmaking, art course, broome art, broome textile, broome textile printmaking, print making

This course is suitable for creative types who have already dabbled in the art of textile printing, and would like to further develop their skills!

Participants will be able to explore some of their favourite motifs on paper and fabric. Students attending this class will learn how to produce their own line of works using some ready-made materials.

IAA03 Traffic Management Skill Set Skill set Face-to-face classroom delivery
Broome Campus
Kununurra Campus

Learn how to implement traffic management processes in accordance with safety management procedures and WA road laws.

This course covers:

  • Traffic control using a stop-slow bat
  • Installing road safety signs and standard equipment in accordance with relevant government legislation
  • Working safely when setting up traffic control equipment and directing traffic around road works

This course is appropriate for construction site and local council works.

IAA04 White Card Skill Set Skill set Face-to-face classroom delivery
Karratha Campus
White Card Skill Set, white card, white card training, white card broome, white card kununurra, white card kimberley, white card pilbara

All workers on construction sites in Australia must hold a White Card.

The White Card Skill Set covers the mandatory work health and safety training required prior to undertaking work on a construction site.

The following topics are covered in this course:

  • Health and safety legislative requirements
  • Identifying construction hazards and risk control measures
  • Health and safety communication and reporting processes
  • Incident and emergency response procedures

Improve your job prospects by completing your White Card today!

K2001P K2001P Work Health & Safety Reps Refresher Course Short Course Face-to-face classroom delivery
Karratha Campus
Tom Price Campus

Need to brush up on your workplace health and safety knowledge? 

This two-day refresher course allows participants to revisit and update skills and knowledge gained during the Intro Training for Work Health and Safety Reps course. Participants will be updated on the essential information required to continue to fulfill their duties as their organisation’s elected work health and safety representative. 

Participants will be guided through:

  • Recent legislation amendments and how to apply them in the workplace
  • Conducting effective investigations into workplace accidents or incidents
  • General refresh on the requirements of an elected work health and safety representative

Do you need to complete the full course? Check out our Introductory Training for Health and Safety Representatives course.

 

Onslow

24 & 28 February

 

IAA20 Working Safely at Heights Skill Set Skill set Face-to-face classroom delivery
Halls Creek Campus
working at heights, work safely at heights, work heights, trades training, crane training

Seeking a role in the resources and infrastructure industry that requires you to perform work at heights?

The Working Safely at Heights Skill Set provides participants with the ability to work confidently and competently at heights.

This course covers:

  • Occupational Health and Safety law, legislation and standards relating to working at heights
  • Identifying, monitoring and reassessing risk control measures
  • Fall arrest systems
  • Personal Protective Equipment
  • Planning, access and egress
  • Safely performing duties
  • System dismantle and pack up
IAA26 Working in Confined Spaces Skill Set Skill set Face-to-face classroom delivery
Halls Creek Campus

Do you need a working in confined spaces ticket for work?

During this short course participant’s will gain the skills and knowledge required to enter and work in confined spaces in the Resources and Infrastructure Industries.
This course is appropriate for those working in operational roles undertaking work in confined spaces.

Students will learn to:

  • Identify areas that constitute confined spaces
  • Comply with site and equipment safety requirements
  • Comply with the  entry and exit procedures, risks and regulations
  • Types of air contaminants and toxic gases
  • Identify the limitations of breathing apparatus
  • Identify equipment types, characteristics, technical capabilities and limitations
  • Comply with site isolation and site control responsibilities and authorities
  • Locate and understand safety data sheets (SDS) information and application
  • Use confined space and industry terminology
IAD24 XERO Introduction Workshop Skill set Face-to-face classroom delivery
Broome Campus

XERO is cloud-based accounting software that is becoming increasingly popular, with many easy-to-use features.  

This workshop provides a short, six hour introduction to XERO software, with the opportunity to study further.  

Use XERO to enter a range of transactions, including: 

  • Invoices
  • Adjustment notes
  • Payments
  • Receipts
  • Bank entries
  • Bank statement
  • Financial reports

The textbook, Conduct Business Activities Using A Computerised Accounting System is required.  

Choose to complete assessments after the workshop and/or receive a letter documenting your participation.

Sorry, your search has returned zero results. Try removing some of the filters to see if you can find some courses.

Page last updated January 21, 2020